Skip to content

Near-Infrared Light Sources: The Search for Flat, Lead-Free LEDs

Invisible near-infrared light runs night vision, face unlock and health sensors, and dome-shaped tin crystals point to a flat, lead-free source.

Point a TV remote at the screen, and nothing seems to leave it. Still, the remote is flashing light the whole time. That light is infrared, which sits just beyond the red your eyes can see. Phones, security cameras and health gadgets depend on this invisible glow as well. Most of it comes from near-infrared light sources, usually tiny LED chips that act like pinpoints. Pinpoints, however, light a wide scene unevenly. Flat glowing panels would work better, but promising candidates often contain toxic lead. So engineers want a source that is flat, bright, stable and lead-free. One recent step comes from a study led by Nanjing University, built on tin. This explainer therefore covers the problem, the science behind it and what could change.

Why Invisible Light Needs Better Sources

Near-infrared light is, in essence, light with slightly longer waves than red. According to NASA’s guide to infrared waves, human eyes cannot see it. Silicon camera chips can, though, especially between 900 and 1,000 nanometers. For that reason, night-vision cameras flood a scene with near-infrared light. The camera sees clearly, while people nearby notice no glare. Likewise, face recognition on phones works in a similar way. This light also passes deeper into skin than visible light does. Fingertip pulse oximeters, for example, shine red and infrared beams through a finger. Doctors and engineers therefore treat this band as a window into the body. Above all, these uses share one need, which is dependable near-infrared light sources.

The Trouble With Point-Like Near-Infrared Light Sources

Today, most near-infrared LEDs are made from gallium arsenide and related crystals. They are bright, but each one behaves like a single point of light. As a result, a wide scene gets hot spots and dim corners. In imaging, that uneven lighting can also distort what the camera records. Each chip is also small, so its total light output stays limited. Flat emitters such as organic and quantum dot LEDs offer even illumination instead. Even so, in the near-infrared they have struggled to combine efficiency with brightness. Perovskites, a family of crystals processed from liquid inks, looked promising. Many of the best ones, though, contain lead. In particular, European rules on hazardous substances restrict lead in electronic equipment. Tin can replace lead, but tin-based films oxidize easily and heat up at high currents.

How LEDs Turn Electricity Into Near-Infrared Light

Every LED is, in short, a sandwich of thin semiconductor layers. One side supplies electrons, while the other supplies positive charges called holes. When the two meet in the middle layer, they release energy as light. Our guide to the PN junction diode explains that meeting point in detail. The middle material then sets the color through a property called the band gap. A smaller band gap gives lower-energy light, that is to say, longer waves. Cesium tin iodide, a lead-free perovskite, emits at about 930 nanometers. That wavelength is invisible to people but easy for silicon cameras to detect. Because perovskites dissolve in solvents, engineers can spread them like ink. A spinning plate, for instance, flings the ink into a thin, even film.

Explainer: Why Light and Heat Get Trapped

Making light inside a film is only half the job. The light must also escape, and much of it does not. Instead, many light waves in a flat film bounce sideways and stay trapped. Engineers track the result with a number called external quantum efficiency. It compares the particles of light leaving with the electrons going in. Heat is the second hurdle. Push more current for more brightness, and the film then warms up. As a result, efficiency drops and the material wears out sooner. Engineers call that drop efficiency roll-off. Good near-infrared light sources must, for this purpose, manage both light and heat at once.

Diagram: rays stay trapped inside a flat glowing film, while rays leave freely from a row of small glowing domes
Fig. 1: Domes Let Trapped Light and Heat Escape

A Lead-Free Fix Built From Tiny Domes

In November 2026, researchers reported one way to tackle both hurdles at the same time. The team, from Nanjing University in China and Linköping University in Sweden, used cesium tin iodide. Yuhan Zhou, Chunxiong Bao and colleagues added two ingredients to the perovskite ink. One was a phosphorus-containing additive, and the other was polyethylene glycol, a common polymer. Without them, the film formed flat plateaus up to a micrometer wide. With them, however, it grew as separate dome-shaped crystals 110 to 210 nanometers in radius. The metal electrode on top then followed each dome’s curve. In effect, every dome gained a tiny curved mirror that steers light outward. Overall, computer simulations put the share of escaping light at 39%, up from 26%. What is more, the first additive reduced defects and slowed the oxidation of tin.

What the Dome-Shaped Crystals Achieved

How much difference did the new shape make? Peak external quantum efficiency rose from 5.2% to 11.0%. The authors describe that as a record for this material. Those domes also ran cooler, because their larger surface sheds heat faster. At one high test current, the dome device stayed about 15 °C cooler. Consequently, it kept over 90% of its peak efficiency at strong currents. In addition, the operating lifetime improved. At a steady test current, brightness took 64.3 hours to fall by half. On heat-spreading sapphire, small devices reached what the authors call record brightness. Equally important, a second laboratory at Huazhong University of Science and Technology independently checked the measurements.

From Lab Bench to a Dark Room

Numbers matter, but flat near-infrared light sources must also scale up. To that end, the team coated a panel five centimeters on each side. In complete darkness, it lit a room of about 4.7 by 4.9 meters. A near-infrared camera saw the room clearly, while a phone camera saw nothing. In other words, the panel gave off no visible red glow. Similarly, the same panel lit the veins in a hand evenly. By comparison, a commercial point LED left bright and dark rings. Finally, a camera read a volunteer’s pulse from 30 centimeters away. It measured 67 beats per minute from light reflected off the arm. These tests show the idea, although they are not product trials.

Infographic: a glowing flat panel serves a security camera in a dark room, a hand showing veins and a pulse trace
Fig. 2: Three Jobs for One Flat Panel

How Flat Near-Infrared Light Sources Could Disrupt Business

Why would a glowing film matter to industry? Today’s near-infrared light sources, for the most part, work as arrays of small point-source chips. A coated panel, in contrast, could cover a large area in one step. For now, sensor and optics companies can test such panels against chip arrays. Within about five years, flat sources could reach security cameras, phones and health wearables. That depends, of course, on longer lifetimes and reliable packaging. In the long run, printed light sources might support contact-free health checks at scale. Some LED manufacturing could then shift toward solution-coated thin films. Start-ups may find openings too, in sensing modules and imaging lights. Our report on perovskite thermal imaging shows another use of these crystals.

What This Means for STEM Education

This topic is also a compact lesson in several school subjects. Physics explains the band gap and why curved surfaces release trapped light. In the same way, chemistry explains how small additives guide crystal growth in a drying film. Engineering, meanwhile, ties both to heat flow and device design. For instance, students can compare a flat mirror with a curved one. The same reasoning also shows why dome shapes send more light forward. Teachers can use the efficiency numbers for simple ratio problems, too. If 11 of every 100 electrons yield escaping light, what happens to the rest? Questions like that link classroom formulas to real devices. Our piece on quantum dot LED displays offers a useful comparison.

Careers and Skills Behind Near-Infrared Light Sources

Several career paths meet in this field. Optoelectronic device engineers design LEDs, displays and the circuits that drive them. Materials scientists develop the inks and also study how films form. Optical and imaging engineers then build cameras and sensors around the light source. Biomedical optics engineers, similarly, apply that light to health monitoring. The O*NET profile for photonics engineers lists typical tasks and skills. According to the US Bureau of Labor Statistics, electrical and electronics engineers earned a median $125,040. By comparison, materials scientists earned a median $117,790 in May 2025. Note that these are US figures, and pay differs between countries. With this in mind, consider physics, materials science, electronics or biomedical engineering.

Limits Worth Keeping in Mind

The results are promising, but several limits deserve attention. To begin with, the team tested its devices inside a sealed glovebox. Real products must survive air, moisture and years of use. A 64-hour half-life is strong for tin perovskites, yet far short of commercial LEDs. The record brightness, moreover, needed sapphire bases and very small devices. Likewise, the room, vein and pulse tests were proof-of-concept demonstrations. Only one volunteer took part in the health measurements. Tin’s tendency to oxidize, in particular, still needs long-term testing in open air. Other near-infrared light sources are improving too, so today’s leader may not stay ahead.

On the whole, invisible light is already part of daily life. The open question is how to make its sources flat, bright and safe. Point-like chips solved brightness first, but they light wide scenes unevenly. Lead-free perovskite films now suggest a different route to near-infrared light sources. Shaping the crystals into domes tackles trapped light and trapped heat together. That idea could outlast any single record, since the authors expect it to suit other emitters. So the next time a remote changes the channel, think about its hidden flash. Better versions of that flash may one day help cameras see and doctors measure.

References

Zhou, Y., Liu, Y., Pu, C., Yu, Q., Feng, X., Chen, D., Niu, W., Ye, Y., Wang, X., Yu, T., Gao, F., Zou, Z., & Bao, C. (2026). Bright and stable near-infrared tin-perovskite LEDs enabled by efficient optical and thermal management. Nature Communications. https://doi.org/10.1038/s41467-026-78951-6

National Aeronautics and Space Administration. (n.d.). Infrared waves. NASA Science. https://science.nasa.gov/ems/07_infraredwaves

NIH MedlinePlus Magazine. (n.d.). Getting an accurate read on pulse oximeters. https://magazine.medlineplus.gov/article/getting-an-accurate-read-on-pulse-oximeters

European Commission. (n.d.). RoHS Directive. https://environment.ec.europa.eu/topics/waste-and-recycling/rohs-directive_en

National Center for O*NET Development. (n.d.). 17-2199.07 – Photonics engineers. O*NET OnLine. https://www.onetonline.org/link/summary/17-2199.07

US Bureau of Labor Statistics. (n.d.). Electrical and electronics engineers. Occupational Outlook Handbook. https://www.bls.gov/ooh/architecture-and-engineering/electrical-and-electronics-engineers.htm

US Bureau of Labor Statistics. (n.d.). Chemists and materials scientists. Occupational Outlook Handbook. https://www.bls.gov/ooh/life-physical-and-social-science/chemists-and-materials-scientists.htm


Reviewed by Satish Kulkarni on November 20, 2026Edited by Dr. Akbar Ahmad
Reviewer note

The article explains how light-emitting diodes work, why light and heat get trapped in thin films, and how dome-shaped crystals ease both problems, in language a student can follow. It treats the new tin-based devices as one step rather than a finished product and lists their limits, including sealed-chamber testing and short lifetimes. A later revision could add a simple sketch of how a curved surface redirects a light ray. Readers who want the full methods and measurements should turn to the source paper in Nature Communications.

Editorial note

ENTECH is running this explainer because invisible near-infrared light already works inside phones, security cameras and health monitors, and its light sources are due for a rethink. The piece uses a recent study from Nanjing University and Linköping University as one example of how a flat, lead-free emitter might be built. Students can see how crystal shape controls both light and heat, and where physics, chemistry and engineering careers meet. The results come from laboratory devices, so readers are encouraged to consult the original paper for methods and full data.

Abdul Qadir
Abdul QadirPhysics Educator
Author

I am a Physics graduate with a strong academic interest in statistical mechanics, complex systems, computational physics, and the study of collective behaviour in interacting systems. During my undergraduate studies, I developed an interest in understanding physical phenomena not only through theoretical concepts but also through computational modelling and simulation. As part of my academic work, I explored the Ising model using Monte Carlo simulations and studied the Active Ising Model to investigate collective behaviour, density variations, and phase transitions in active systems. These projects introduced me to computational approaches in physics and strengthened my interest in understanding how simple microscopic interactions can give rise to complex macroscopic behaviour. Alongside my academic interests, I am passionate about education and science communication. I have experience helping students and peers understand concepts in physics and mathematics, with an emphasis on intuitive explanations rather than simply memorising formulas. I enjoy connecting scientific ideas to everyday experiences and presenting complex topics in a way that is clear, engaging, and accessible. I am also interested in the role of technology in education and the development of digital learning resources. Through writing, teaching, and educational projects, I hope to contribute to making scientific knowledge more accessible to students and curious learners. My broader interests include non-equilibrium statistical mechanics, active matter, phase transitions, computational modelling, complex systems, and science education. Through my work, I aim to continue developing as a researcher while contributing to science communication and education.

github.com/Abdulqadir-physics

Disclaimer.